manualshive.com logo in svg

Konica Minolta SD-511, Installation Manual

The Konica Minolta SD-511 Installation Manual is a crucial resource for setting up your device properly. You can download this manual for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions to ensure smooth installation and usage of the Konica Minolta SD-511. Download now to get started!

Share
Download
background image

E-8

2. Check the crease for deviation

(Measure width A1 and A2).
Reference: A1 - A2 = 0 ± 1.0 mm

3. Loose the two screws at the right side of the sad-

dle unit as shown in the illustration below.

4. Loose the two screws at the left side of the saddle 

unit as shown in the illustration below.

5. Incline the guide plate assy shown in the illustra-

tion and adjust the skew.

Note:

Incline the guide plate assy forward or backward 
according to the deviation of the crease.

[If the staple positions deviate as shown below]
Incline the guide plate assy backward.

[If the staple positions deviate as shown below]
Incline the guide plate assy forward.

6. Tighten the four screws loosen in step 3 and 4.

A10DIXC034DB

A1

A2

Crease

A3ERIXC029DA

A3ERIXC030DA

Screw

A3ERIXC031DB

Guide plate assy

Crease

A10DIXC039DB

A10DIXC040DB

Crease

Summary of Contents for SD-511












Reviews:

No comments

Related manuals for SD-511

Brands by name

Popular brands

Load more brands