background image

59

58

CAMERA ERROR

If all the indicators on the data panel blink, or the data panel is blank and the
camera will not function with a recently installed battery, remove and reinsert the
battery. If the camera does not resume normal operation, or the camera
malfunctions repeatedly, contact an authorized Konica Minolta Service Facility.

QUESTIONS AND SERVICE

• If you have questions about your camera, contact your local camera dealer or

write to the Konica Minolta distributor in your area.

• Before shipping your camera for repair, please contact an authorized Konica

Minolta Service Facility for details.

CARE AND STORAGE

APPENDIX

BEFORE IMPORTANT EVENTS

• Check camera operation carefully and take test photographs. Purchase a spare

battery.

• Konica Minolta is not responsible for any loss which may occur due to an

equipment malfunction.

STORAGE

When storing the camera for extended periods, please follow these guidelines:
• Store the camera in a cool, dry, well-ventilated area away from dust and

chemicals. For very long periods, place the camera in an airtight container with
a silica gel drying agent.

• After prolonged storage, always check the camera’s operation to make sure it

is functioning properly.

Summary of Contents for Zoom I60c


































Reviews: