2
ENGLISH
Main functions
A. Sauna (heating)
B. Six types of the massage modes (display with the LED light)
C. Ten gradation of the adjustment for the intensity
D. Auto shut-off after 15 minutes massage
E. Temperature-adjustable heating output (40 --- 50 )
F. Auto shut-off after about 20 seconds in standby mode
G. Illuminant logo
H. 2 massage pads included
Issues to be addressed in the use
Before use, please make sure the power is turned off. Always keep the massage pads clean.
And please start from the lowest degree to higher gradually. Before moving the massage pads
to other parts of the body, make sure you have turned off the power. Please do not use the
machine on the head, by the mouth or near the genitalia. Please do not use in a room with very
high temperature or in the shower. It is prohibited to use when driving a car or sleeping. High-
intensity massage will not improve the result for sure, and excessive stimulation or massage on
one bodypart for a long time will possibly cause infl ammation or a red rash on the skin.
Please consider
A. The intensity: various people have different requirements for the intensity, and the power
volume in the battery and the situation of the massage pads all will affect the change of the
intensity. Therefore, please adjust the control button for the intensity to the most comfortable
position.
B. Duration: the standard duration for each part is 15 minutes, and one massage should not
exceed 60 minutes.
C. Use: it is possible to use this device two or four times a day. If you feel tired after using it for
a week, you should reduce the intensity and the duration of the massage. It is wise to reduce
the amount of massages as well.
D. Temperature: climate, surrounding environment, personal health, etc. are all important
elements that affect how the temperature is found by the user. Therefore it is important to
adjust the temperature of the pads to get the desired heat.
Buttons:
1. MODE button: For mode conversion
2. RESET button: To restore (pressing this button in any state, it will return to the fi rst mode of
the status without the intensity), and start up the machine
3. UP button: start the machine (the mode before starting the machine and the related
parameters can be reserved), upward adjustment of intensity (only after starting up the
machine)
4. DOWN button: shut off the machine\downward adjustment of intensity value (pressing after
adjusting to the lowest degree will shut off the machine)
