2
ENGLISH
Audio/Video PLL mono modulator
Power supply:
230 V / 50 Hz
Video input:
1 Vss
Video output:
0.7 Vss
RF output:
70 dB
μ
V, channel 21-69
Standard:
PAL
G
With the SAT-MOD1
2
PLL Modulator you will be able to distribute the video and audio signal from
any source to all the TV-sets of the house. The SAT-MOD1
2
is especially useful for digital satellite
receivers and DVD-players without internal modulator.
• Choose the output channel at a free RF channel at your antenna installation. See the channel table
at the end of this user manual.
• Keep switch 1 at the OFF position in order to provide the test signal.
• If you see any contrast differences between the pictures of SAT-MOD1
2
channel and the
standard channels try to adjust very carefully the video level (at the bottom of the modulator).
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorised technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos, brands or brand logos and product names are trademarks or registered trademarks of their
respective holders and are hereby recognised as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
