11
5.2 Camera Select
The system can display 4 cameras in one screen (Quad Mode). User can configure which camera to display.
Press [
Select ] to modify setting and press [ CH1 ],[ CH2 ], [ CH3 ],[ CH4 ] to set each channel
separately. If no channel is open, system will display [OFF] on monitor.
5.3 Record Select
Configure which channel is allowed to record.
5.4 Record Mode
There are two modes for video recording,
[Each Mode]:
Compress and record each channel video separately, therefore, the user can enlarge a
single channel to full screen display. For example, user can turn off record function of CH1
and CH2 and then the system only records CH3 and CH4.
Press
[ CH1 ],[ CH2 ],[ CH3 ],[ CH4 ]
to switch between channels during
playback of recorded video.
[Quad Mode]:
Compress and record all 4 channel video into one file, therefore user can not enlarge
single channel to full screen. User can’t use the each mode record in this mode.
5.5 Record Frame Rate
Record frame rate will affect the movement of objects in the recorded video. More frames means more smooth
movement and cost more hard disk space. System default value is
25
fps, that means system will record 25
frame per second. User can set frame rate as
25, 12, 8, 6, 4, 3, 2, 1
frames per second.
5.6 Record Quality
There are three level of record quality,
High, Normal
and
Low.
Higher quality costs more hard disk space.
Record frame rate, record quality and hard disk space will affect the total record time of your DVR system.
5.7 Record Schedule
Users can setup video record method by time, sensor Triggered and Motion Triggered.
