149/1 Bass Trombone Stand
- solid, robust metal stand
- folds compactly, especially suitable for mobile use
- exceptionally easy to adjust to suit almost all trombones:
-
a. The stand is freely adjustable (700 to 1160 mm)
-
b. The distance between ball and cone support is also freely adjustable
- the wood cone support has soft felt protection
- set-up and dismantling is easy, no need for tools
SAFETY INSTRUCTIONS
- use only on a suitable, even and stable surface.
- before positioning the instrument, ensure that the
-
distance between the ball and the cone support of the
-
stand is correctly adjusted as:
-
the entire weight of the instrument is carried by the
-
cone support.
-
The ball is merely a positioning prop for the bass
-
trombone.
-
WARNING: too much weight on the ball could deform
-
the metal.
- ensure the height of the stand is correct
- position the instrument with care
- take care when setting up and dismantling the stand,
-
beware of pinching hands and fingers
- the high quality floor protectors are virtually free of
-
plasticisers;
-
However, if necessary (sensitive flooring) use a non-
-
slip underlay.
ASSEMBLY
The 14910 bass trombone stand is very easy to set up.
All the components are pre-assembled.
1
Extend the legs
2
Loosen the pedestal knob
3
Move the pedestal down until the stop position is
3
reached, re-tighten knob.
Thank you for choosing this product. These instructions contain information
about the installation and use of the stand. We suggest you keep the instructions in a safe place
for later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14910-013-55 Rev.01 03-80-215-00 12/12
