SAFETY NOTES
TECHNICAL DATA / SPECIFICATIONS
Thank you for choosing this product. The instructions provide directions to all of the important set up and handling steps.
We recommend you keep these instructions for future reference.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18950-017-55 Rev.01 03-80-312-00 2/17
- Maximum Load 80 kg.
- Be sure that the surface will bear the load and is suitable and level.
- Prior to attaching the keyboard ensure that:
-
a. the stand legs are adjusted to the same height and that
-
b. the folding struts are extended as far as they will go
5
- The fact that the product is collapsible and adjustable can result in the risk of
-
pinching/wedging of your fingers. Careful and attentive handling and setup
-
during setup, operation and disassembly is indispensable.
- The instrument is most secure when it is placed on the slip-resistant rubber
-
caps, which can be adhered to the table according to the instrument’s
-
requirements
8
COMPONENTS
A
Pre-assembled folding table (see Instructions
1
)
B
4 U-Profile-Feet
3.a
(= Height adjustments)
C
Accessory bag with 4x:
C
- Caps
2.b
,
C
- Hexagonal screws
3.b.1
,
C
- Wing nuts
3.b.2
,
C
- Hexagon nuts
4.a.1
,
C
- Floor adjustment screws
4.a.2
C
- Rubber pads
8
D
Box W x D x H: 655 x 455 x 130 mm
DIMENSIONS
Table surface: Width: 650 - 1040 mm, depth: 394 mm
Height: 600 - 1000 mm (10 positions, see sections
3
,
6
,
7
)
Space requirements (W x D): min. 790 x 460 mm / max. 920 x 510 mm
CHECK, MAINTENANCE, CLEANING
- In the event of workstation maintenance pay attention to possible risks
-
(Risk of bumping into the table, Wedging/Pinching)
- To care for the product, use a damp cloth and a non-abrasive
-
cleaning agent.
FAULT-FINDING (F) and REPAIR (R)
F: Stand wobbles on the floor
F:
R: Check if the legs are adjusted properly,
F: R:
ddjust the adjustment screws, check surface.
F: Stand is not stable
F:
R: Tighten the clamp screws on the telescope tube
F: Keyboard is not firmly placed on the stand (unstable)
F:
R: Check the bottom of the keyboard for uneven surfaces,
F: R:
position the rubber caps.
18950 Table-style keyboard stand
- Extremely stable and flexible
- Collapsible for use on the road
- With adjustment screws to adjust for uneven surfaces
- With a wide array of additional uses: Stacker for 2 keyboard, boom arm, sheet music holder, tablet holder, laptop holder
-Technical Information: Height: 600 - 1000 mm, Table depth: 394 mm, Width: 650 - 1040 mm, 9.6 kg
Material
Steel tubes/-struts - black powder coated
Screws, nuts - galvanized, nickel plated
Adjustment screws, rubber caps - PA
Load
max. 80 kg
Dimensions
Width: 650 - 1040 mm
Height: 600 - 1000 mm
Depth: 394 mm
Weight
9.6 kg
Box
655 x 455 x 130 mm, Gross weight: 10.8 kg
Accessories
(optional)
18815 Laptop holder
18817 Universal holder (Ttablet)
18818 Sheet music and concept holder
18952 Stacker
18956 Boom arm
A
B
C
D
COMPONENTS
DIMENSIONS
