TECHNICAL DATA / SPECIFICATIONS
CHECK, MAINTENANCE, CLEANING
TIPS on how to secure the keyboard
- In the event of workstation maintenance pay attention to possible
-
risks (pinched fingers, impact, the stand falls over).
- To care for the product use a damp cloth and a non-abrasive
-
cleaning agent.
FAULT FINDING (F) & REMEDY (R)
F: Stand is not stable
F:
B: Adjust balance end caps, check surface
F: Height/width of the stand does not fit
F:
B: Select a different angle
F: Keyboard is not firmly placed on the stand (unstable)
F:
B: Check the bottom of the keyboard for uneven surfaces.
F:
B: Ensure the keyboard is centered on the support arms.
F:
B: Adjust the width of the stand.
F:
B: Check the keyboard overlap on the support arms
F: B:
a. not enough
F: B:
b. too much
OK:
Keyboard is centered / adequate overlap
NOT OK:
Keyboard is not centered/ the overlap is too
much i.e. does not overlap enough
Material
Steel Tubes: powder coated, black
Central joint: zinc-pressure die cast, black powder coating
Screws, nuts, bolts: galvanized, nickel plated
End Caps, rubber base/top: TPE, Shore 59A black
Clamp nuts: PA
max. Weight
max. 40 kg
Dimensions
Many Positions
Example: Height 805 mm x width 585 mm
Support tube: ø 30 x 350 mm; base tube: ø 30 x 500 mm
with protective rubber covering ø 37 mm
Packaging
Box: 1015 x 520 x 102 mm
Weight
6.0 kg
SETUP VARIATIONS
Selection
DIMENSIONS
Transportation setting
(cardboard packaging)
USAGE NOTES / FUNCTION
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18976-000-55 Rev.01 03-80-247-00 6/14
NOT OK:
Overlap is
too much
NOT OK:
Does not overlap
enough
NOT OK:
Not Centered
OK:
Overlap
adequate
OK:
Overlap
adequate
OK:
Centered
NOT OK:
Overlap is
too much
NOT OK:
Overlap is
too much
OK:
Centered
