19782 Desktop camera stand
Information for use
Intended use
The desktop camera stand with 1/4" threaded connection is designed to support compact
cameras, action cameras, web cams, mini-projectors and mobile recorders. Thanks to the ball
joint the mounted devices can be rotated by 360° and clamped in any position. The incline is
stepless adjustable by 90°. The table stand is construed for a load capacity of 1 kg.
Foreseeable misapplication
Never transport a stand with mounted device. Securely hold the mounted equipment before
loosening clamping screw or clamping levers.
General
u
The stand must be placed on a level and stable surface.
u
The user should be physically fit and technically competent.
u
The device to be mounted should be equipped with a 1/4" thread. Follow the respective
u
operating instructions or assembly instructions regarding the device. The maximum screw
u
penetration must be observed otherwise it may damage the equipment.
u
The mounted device should be placed as centrically as possible on the stand to avoid
u
increased risk of tipping.
u
Injuries und damages can be caused to individuals or property if the camera stand should
u
tip or fall.
u
Because of the adjustability of the components there is finger trap risk between the
u
components.
u
The usage information is an integral part of the product and should be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
