AMP STAND ADJUSTMENTS
A. SUPPORT ARM WIDTH (First remove AMP)
4
The maximum support arm width is determined
4
when the struts are as level as possible.
5
Smaller support arm widths can be attained by
5
lowering the base tube.
5
NOTE:
5
The reduction of the support arm width also
5
results in smaller distances between the legs.
5
Please check the stability of the installation.
B. ANGLE OF THE SUPPORT ARMS (First remove the AMP)
6
The back leg is
6
a threaded rod.
6
By turning this rod the angle
6
of the stand
6
and as such the
6
support arms can
6
be adjusted.
7
An additional adjustment of
7
the angle is possible by
7
adjusting the positioning
7
of the legs, however this
7
can negatively affect stand
7
stability. This is why this
7
option is more suited to
7
smaller adjustments.
C. TELESCOPE ARM FOR MICROPHONE CONNECTION
C.
(Do not remove the AMP)
0
8
With 3/8" connection thread and 5/8" reducer thread.
0
9
The extension tube can be extended up to 420mm:
90
loosen the clamp screw, extend the tube, tighten the screw.
10
Screw on the microphone arm.
USAGE NOTES / FUNCTIONS
TECHNICAL DATA
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
28130-011-55 Rev.07 03-80-791-00 3/14
Boom arm - z.B. 211
CHECK, MAINTENANCE, CLEANING
- Careful use of the stand maintains the use of the telescope and the
-
load bearing functionality of the stand, as well as the safety of the installation
- Perform workstation maintenance only without the amp on the support arms
-
and watch for eventual risks (pinched fingers, impact, the stand falls over)
- To care for the product use a damp cloth and a non-abrasive cleaning agent
Material
Tubes, Struts, Threads: Steel
Brackets: Polyamid (PA)
End Caps, Support Arms: TPE
Connection Elements: Steel nickel coated / galvanized
Dimensions
Height: 570 - 990 mm
Stand area: max. 430 x 530 mm
Packaging
dimensions, kg
W x D x H: 122 x 86 x 602 mm, 2.0 kg
Packaging
Poly-Bag
Accessories
(optional)
Microphone Arms: e.g. 211, 211/1, 21140
Microphone Clamps 85035, 85050, 85055, 85060
Carrying Case 10811
