17534 Four guitar stand »Guardian 3+1«
- flexible and versatile:
for the stage, studio, shop and home
for 1 acoustic guitar, 3 E guitars / base guitars
- exceptional instrument protection:
quality materials (flexible, translucent contact elements)
intelligent stand design (protective holders, recesses, support arms)
- 9 integrated plectrum holders
- light, space-saving transport – simple to set up and collapse
- simply to use; no tools required for assembly
- New: in response to your requests - 4 casters can be mounted See Article-No. 17510
SAFETY NOTES
- Be sure that the surface will bear the load and is suitable and level
- Body and neck support elements must always be clicked into place when the stand is setup (90°-Angle , "click" into place)
- The fact that the product is collapsible and adjustable, can result in the risk of pinching/wedging. Careful and attentive handling during
-
setup, operation, and disassembly is indispensable.
- When transporting and storing the stand, ensure that weight is not placed on the body and neck support elements, to ensure that they
-
maintain their shape
- Other objects than guitars may not be placed on the stand (e.g. clothing).
- Do not move or transport the stand with instruments.
SET UP
All stand components come pre-assembled.
All that needs to be done is to place the
stand in position.
This is accomplished as follows:
1
To setup the stand, take the neck and
1
body support arms and unfold them as far
1
as they will go...
2
...until they reach the final position (=90°
2
Angle). This position is reached when you
2
hear it "click" into place
2
Advantage: the vertical support arm
2
cannot unexpectedly unfold.
3
Now place the »Guardian« on its feet.
DISASSEMBLY
PLEASE NOTE!
first: UNLOCK 4
then: FOLD
5
4
The guitar neck support arm is unlocked by
4
simultaneously pushing both vertical tubes
4
approx. 5 mm downwards: refer to the labels
4
(1 push)...
5
...and they will immediately fold forward
5
see label (2-close)
6
Both tubes are now placed into the side
6
brackets as far as they will go where they
6
will remain in place - no further adjustments
6
needed.
The folded stand is space-saving and recommended
for transport.
Transport Dimensions W x D x H: 626 x 173 x 670 mm.
Thank you for choosing this product. This instruction manual informs you about the important steps to set up an handle the product. We
recommend to keep the manual in a separate place for a possible later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
17534-016-00 Rev.07 03-80-291-00 4/19
