PLACEMENT OF THE INSTRUMENTS
USAGE NOTES
CHECK, MAINTENANCE, CLEANING
For maintenance work, pay attention to possible risks (squeezing, hurting).
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
FAULT FINDING (F) and REPAIR (R)
F: Stand is not stable
R: Check the surface
R: Minimal height differences i.e. the surface is not level,
R:
it can be adjusted by placing a bit of pressure on the
R:
stand foot or by adjusting the stand frames a bit - until
R:
the stand is in a stable position.
F: Support arm "moves"R: Check if the support arm has clicked into the proper
R:
position (click sound,
1
,
2
).
F: The guitar is leaning R: Ensure that the guitar neck is in the proper Lower
F:
to one side
B:
Body Support Area and the corresponding Guitar
R:
Neck Support Area
10
,
11
.
R: Beware of the recesses - in particular as regards
B:
E-guitars and base guitars
8
.
Guitars are safe and secure in the »Guardian« stand!
1
7
Upholstered support elements protect your guitar
1
8
Recesses in the support element position the guitars and protect them
18
from moving and twisting
1
9
Protective support arms ensure that the instruments do not bump into
19
each other
10
NOTE: Each Lower Body Support Area is aligned with the Guitar Neck
10
Support Area that is located directly above.
11
Do no place the instrument in the incorrect Guitar Neck Support Area. This
11
results in the Guitar being incorrectly positioned i.e. positioned at an angle.
12
The guitars can be placed facing right or left. By carefully leaning the
12
back of the guitar neck against the support, pressure is not placed on
12
the instrument’s strings.
13
First place the body of the guitar into the lower support area...
14
...and then place the neck i.e. back of the neck of the guitar in the
14
corresponding guitar neck support area.
TECHNICAL DATA
Material
Stand feet: PA with glass fiber
Cushions: TP-elastomer
Frame, connection elements: Steel, alu
Capacity
4 E-guitars oder 3 E- and 1 acoustic -
guitars and 9 picks
Dimensions W x D x H 626 x 335 x 700 mm
Packed size W x D x H 626 x 173 x 670 mm
Box
W x D x H 700 x 175 x 670 mm
Weight
net 3.8 kg; gross 4.6 kg
Accessories
K&M 17510 = Caster set for
»Guardian«
We use high quality materials to protects the guitars. Due to the softness of some lacquers, in particular nitrocellulose based lacquers,
dents can occur simply as the result of gravity - i.e. the weight of the instrument but these are considered to be so minimal, that they
are negligent compared to normal wear and tear.
15
PICK HOLDERS
16
CASTERS
If required, the
»Guardian« can be
equipped with a set of
lockable castors. The
bushings for inserting the
castors are located under
the rubber caps of the
floor supports. Please
refer to K&M Article
17510 Caster Set Kit.
Lower Body
Support Area
PICK
HOLDERS
Upholstered
SUPPORT
ELEMENTS
Recesses for
Acoustic and
E-guitars
PROTECTIVE BARS
Guitar Neck
Support Area
Strings are not
placed under
any pressure
There are 9 integrated pick holders
on the back of the neck supports.
We recommend,
that the picks be
removed prior to
disassembly and
transport.
