28
Ha már a gépen van az illesztőprogram
1. A
Found New Hardware Wizard
(Új hardver) varázslóban válassza a
No, not this time
(Most nem) lehetőséget,
majd kattintson a
Next
(Tovább) gombra.
2. Helyezze be az illesztőprogramokat tartalmazó CD-t, válassza az
Install the software automatically
(Recommended)
(Telepítse a szoftvert beavatkozás nélkül (ajánlott)) lehetőséget, majd kattintson a Next (Tovább)
gombra.
3. Kattintson a
Finish
(Befejezés) gombra.
Windows
®
Vista esetén
Új telepítés
Új telepítés esetén az illesztőprogramot flopi lemezről kell telepíteni. Másolja a kártyához adott CD lemezen levő
„PCI_IO\Sata\Non-RAID”
mappa tartalmát egy üres flopilemezre, majd kövesse az alábbi útmutatót.
1. Kövesse a Microsoft Windows telepítési eljárását.
2. A Windows telepítő képernyőjén nyomja meg a
Load Driver
(Illesztőprogram betöltése) gombot az illesztőprogram
telepítéséhez.
3. Helyezze be a flopi lemezt, válassza a Silicon Image
SiI 3512 SATALink Controller (A:\si3112.inf)
lehetőséget, majd
kattintson a
Next
(Tovább) gombra. (Az
A:
\ helyett szükség szerint írja be a flopi meghajtó betűjelét.)
4. A Windows telepítés lezárásához kövesse a képernyőn megjelenő utasításokat.
Ha már a gépen van az illesztőprogram
1. A
Found New Hardware Wizard
(Új hardver) varázslóban válassza a
Locate and install driver software
(recommended)
(Illesztőprogram keresése és telepítése (ajánlott)) pontot.
2. Helyezze be az illesztőprogramokat tartalmazó CD-t, majd kattintson a
Next
(Tovább) gombra.
3. Ha a rendszer figyelmeztet, hogy az illesztőprogramok nincsenek aláírva, válassza az
Install this driver software
anyway
(Telepítem az illesztőprogramot) lehetőséget.
4. A telepítés lezárásaként kattintson a
Close
(Bezárás) gombra.
Windows
®
Vista-x64 esetén
Új telepítés
Új telepítés esetén az illesztőprogramot flopi lemezről kell telepíteni. Másolja a kártyához adott CD lemezen levő
„PCI_IO\Sata\64-bit Windows IDE Driver”
mappa tartalmát egy üres flopilemezre, majd kövesse az alábbi útmutatót.
1. Kövesse a Microsoft Windows telepítési eljárását.
2. Ha a Windows telepítő varázslója kéri, indítsa újra a számítógépet.
3. A Windows telepítő képernyőjén nyomja meg a
Load Driver
(Illesztőprogram betöltése) gombot az illesztőprogram
telepítéséhez.
4. Helyezze be a flopi lemezt, válassza a
Silicon Image SiI 3512 SATALink Controller (A:\si3112.inf)
lehetőséget,
majd kattintson a
Next
(Tovább) gombra. (Az
A:
\ helyett szükség szerint írja be a flopi meghajtó betűjelét.)
5. A Windows
®
telepítés lezárásához kövesse a képernyőn megjelenő utasításokat.
Ha már a gépen van az illesztőprogram
1. A
Found New Hardware Wizard
(Új hardver) varázslóban válassza a
Locate and install driver software
(recommended)
(Illesztőprogram keresése és telepítése (ajánlott)) pontot.
2. Helyezze be az illesztőprogramokat tartalmazó CD-t, majd kattintson a
Next
(Tovább) gombra.
3. Ha a rendszer figyelmeztet, hogy az illesztőprogramok nincsenek aláírva, válassza az
Install this driver software
anyway
(Telepítem az illesztőprogramot) lehetőséget.
4. A telepítés lezárásaként kattintson a
Close
(Bezárás) gombra.
Az illesztőprogram telepítésének ellenőrzése
1. Kattintson a jobb gombbal a
My Computer
(Sajátgép) ikonra, majd ott a
Manage
(Kezelés) pontra.
2. Válassza a
Device Manager
(Eszközkezelő) lehetőséget.
3. Keresse a következőt:
Windows
®
2000/XP/2003 esetén:
Kattintson duplán a
SCSI and RAID Controller
(SCSI és RAID vezérlők) pontra:
ott kell, hogy legyen a
Silicon Image SiI 3512 SATALink Controller
elem.
Windows
®
Vista esetén:
Kattintson duplán a
Storage controllers
(Tárolóvezérlők) pontra:
ott kell, hogy legyen a
Silicon Image SiI 3512 SATALink Controller
elem.
Biztonsági óvintézkedések:
Vigyázzon, hogy ne érje a terméket víz vagy nedvesség.