5
4. If the wireless access point uses encryption,
you have to input WEP passphrase or WPA
preshared key. Please ask the owner of the
wireless access point you want to connect,
and input the correct passphrase / preshared
key here, then click „OK“. If the value you
inputted here is wrong, you will not be able
to connect to wireless access point.
Authentication type is selected
automatically, please don’t change it.
5. If the wireless access point is successfully
connected, you’ll see a „Connected“
message displayed at the lower-left corner
of wireless confi guration utility window. Click
„OK“ to exit.
For advanced settings and other features of this USB wireless network card, please refer to user
manual enclosed in supplied CD-ROM.
