Konig HAV-CR24, Manual

2

ENGLISH

LOCATION OF CONTROLS

1. On/Off/Auto

2. Time set

3. Alarm /Off

4. Sleep

5. Snooze button

6. Hour

7. Minute

8. Volume control / Buzzer

9. Band switch

10. Tuning control

11. AUTO indicator

12. HI-LO dimmer

13. Alarm Set

BOTTOM: 

Battery compartment for 9-Volt (6F22) battery (not included) for back up power.

CLOCK OPERATION

1.  Plug the mains cord into a 230V AC wall outlet

2.  The unit is now working; the time flashes in the display.

3.  To set the correct time, simultaneously press the TIME SET Button (2) and HOUR button (6) and release 

when the correct hours are displayed. Now simultaneously press the MINUTE button (7) and the TIME 

SET button (2) to set the correct time.

RADIO OPERATION

1.  Slide the ON/OFF/AUTO switch (1) to the ON position.
2.  Slide the BAND switch (9) to FM or AM.
3.  Turn the volume control (8) to the desired volume.
4.  Turn the TUNING control (10) to select your favourite station.
5.  Antenna
 

For AM reception, this radio incorporates a highly sensitive ferrite antenna.

For FM reception, this set is equipped with an external FM wire antenna. Unwind to full length for peak 

performance.

WAKE UP TO RADIO

After selecting your station and setting the volume to the desired level, proceed as follows: 

1.  Slide the ON/OFF/AUTO switch (1) to the AUTO position.
2.  Press and hold the ALARM SET button (3) and press the HOUR button (6) and then the MINUTE 

button (7) until the correct alarm time is set. To check the alarm time, simply press the ALARM SET 

button (13). The preset alarm time will continue to be registered in the time memory and the radio will 

switch on the next day at the same time. To turn the radio off, simply press the ALARM OFF button (3).

3.  When the alarm is set, but you want to listen the radio before the set alarm time, press the SLEEP 

button (4) once to turn the radio on and press the SNOOZE button (5) again to turn the radio off.

WAKE UP TO BUZZER

Set the controls as for “Wake up to Radio” but with volume control (8) to the BUZZER position. The buzzer can 

be switched off by pressing the ALARM OFF button (3) or change to radio by sliding the ON/OFF/AUTO switch 

(1) to the ON position.

SLEEP TO RADIO

The radio can be set to play and to switch off automatically after 1 minute up to 1 hour and 59 minutes: With 

all controls preset in the “Wake up to Radio” position press the SLEEP button (4) and the MINUTE button (7) 

to count down to the desired sleep time. To switch off the radio before the end of the registered sleep time, 

simply press the SNOOZE button (5).