3
USING THE CD/MP3 PLAYER
1. The appliance is suitable to play compact discs bearing the identification mark shown.
Whilst it can also read and play CD-R and CD-RW, MP3 discs, the playability may be
affected by the type of software used to create the discs and the quality and condition of
the blank media. This is not an indication of a problem with the unit.
2. Remove the adhesive tape on the CD door, press the CD door at the CD open/close point and
remove the protective card.
3. Slide the function switch to the CD position, the display will illuminate and will show ‘--’.
4. Insert a disc (label side up) and gently close the CD door. The display will initially show a flashing ‘--’
followed by the total number of tracks for that disc after a few seconds.
5. If the disc is upside down or damaged the display will still show a flashing ‘--’ followed by ‘Er’. If no
disc has been inserted the display will show ‘no’.
6. To start the music, press the PLAY/PAUSE (
) button. After a few seconds the music will start to
play, the display will show ‘01’ and the play / pause indicator (►) will illuminate in the display.
7. Adjust the volume to the desired level by rotating the volume control knob.
8. To pause the music, press the PLAY/PAUSE ( ) button. The play indicator and track number will
flash in the display to show that the unit is in pause mode.
9. To resume play, press the PLAY/PAUSE ( ) button again, the music will start to play and track
number and play indicator will stop flashing.
10. To stop playing the disc, press the CD STOP button and the display will show the total number of
tracks on the CD.
11. To turn off the unit at any time, move the function switch to the AUX IN position or slide the main
power switch to the Off position
SKIP AND SEARCH FUNCTIONS
1. This function allows the beginning of a track, or a particular point in a track to be located during
play.
2. To move forward to the next track, press the SKIP / SEARCH forward (
) button. Repeat the
action to move to each successive track. The display will show the track selected and this function
works in play, pause and stop modes.
3. To move back to the start of the current track, press the SKIP / SEARCH backwards (
) button.
Press again to move back to the previous track. The display will show the track selected and this
function works in play, pause and stop modes.
4. To search forward or backwards for a particular point in a track, press and hold either SKIP/
SEARCH (
or
) button to move in the desired direction. When the point in the track has been
located, release the button to resume normal playback.
PLAY MODE FUNCTION
During playback press PLAY MODE repeatedly to activate repeated playing.
The display shows the chosen function.
REPEAT 1
– the given track is played over and over again.
REPEAT
ALBUM
– the selected folder is played repeatedly.
REPEAT
ALL
– the entire CD is played repeatedly.
RANDOM
– repeats all tracks in random order
PROGRAMMED (MEMORY) PLAY FUNCTION
This function allows up to 20 tracks to be programmed into the memory and be played in a specific
order.
1.
During stop mode
, press the PLAY MODE button. ‘01’ will be briefly shown in the display before
the display shows ‘00’ and the program (PROG) indicator will flash in the display.
2. Press FOLDER UP button repeatedly to select the desired folder (For MP3 disc).
