5
Mouse operation:
After connecting the digital video recorder to a monitor, the monitor screen shows the multiple channels 1~4
(SEC-DVR404) or 1~8 (SEC-DVR408). The monitor screen also displays the mouse cursor.
The operation is as follows:
1) Double click on the LEFT mouse button to select a channel in full screen.
2) Double click on the LEFT mouse button again to return to the multiple channels.
3) One click on the RIGHT mouse button provides access to the menu. In the menu, the mouse operates in
the same way as with a computer.
Installation of the hard disk drive:
1. Remove the screws on the left and right sides
and on the rear panel
2. Remove the cover by sliding it backwards and lifting
it slightly
Power cable
3. Connect the SATA data
cable and the power cable
to the hard disk drive
SATA data cable
4. Place the hard disk drive in the bracket
and attach the hard disk drive to the
bracket using the screws.
Operating the hard disk recorder:
When the hard disk drive is installed and all cables are connected, the hard disk recorder is ready for use. To
configure the advanced settings of the hard disk recorder, you have to access the menu. For instructions on
how to set the hard disk recorder with the menu, please refer to the full English manual supplied on the CD.
Summary of Contents for SEC-DVR404
Page 66: ...66 1 2 3 SATA SATA 4 CD...
