Könner & Söhnen KS 600RTG, Manual

The warranty card should be kept throughout the warranty period. In case of warranty card loss, a second 

one will not be provided. The customer must provide the warranty card and buyer`s check during request 

for repair or exchange. Otherwise, the warranty service will not be provided. The warranty card, attached to 

the product during sale, should be correctly and fully completed by the retailer and customer, signed and 

stamped. In other cases, warranty is not considered as valid.
Provide clean product to the service center. Parts, that must be replaced, are the property of the service 

center.
WARRANTY EXCLUSIONS:

WARRANTY EXCLUSIONS:
•  If the user has failed to comply with the instructions in this manual.
•  If the product features damaged or missing identification stickers or labels, serial numbers, etc.
•  If product malfunction was due to improper transportation, storage and maintenance.
•  In case of mechanical damages (cracks, chips, impact and fall marks, deformation of housing, power 

cord, plug or any other components), including those resulting from the freezing of water (ice formation), 

provided there are foreign objects inside the unit.

•  If the product has been improperly installed and connected to the mains supply or misused.
•  If the claimed malfunction cannot be diagnosed or demonstrated.
•  If proper operation of the product can be restored following cleaning from dust and dirt, appropriate 

adjustment, maintenance, oil change, etc.

•  If the product is used for business related purposes.
•  If faults are detected, which have been caused by product overload. Signs of overload are molten or 

discolored parts as a result of high temperatures, damaged cylinder or piston surfaces, degraded piston 

rings or connecting rod bushes.

•  The warranty does not cover the failure of the product automatic voltage regulator due to careless 

handling or mishandling.

•  

If faults are detected, which have been caused by instability of the user’s power grid.

•  If there are faults caused by contamination or fouling such as contamination of the fuel, oil or cooling 

system.

•  If electrical cables or plugs show signs of mechanical or thermal damage.
•  In the event of foreign liquids and objects, metal chips, etc. inside the product.
•  If the malfunction is caused by the use of non-original spare parts and materials, oils, etc.
•  If there are two or more faulty units that are not interconnected.
•  If the damage was caused by natural factors such as dirt, dust, humidity, high or low temperature, natural 

disasters.

•  In case of simultaneous failure of the rotor and stator.
•  For wear parts and accessories (spark plugs, nozzles, pulleys, filter and safety elements, batteries, 

detachables, belts, rubber seals, clutch springs, axles, hand starters, grease, mountings, working 

surfaces, hoses, chains, and tires).

•  To preventive maintenance (cleaning, greasing, washing), installation and adjustment.
•  If the product was tampered with, independently repaired or modified.
•  In case of malfunctions resulting from normal wear and tear as a result of long-term use (end of life).
•  If product operation was not stopped and continued after detecting a malfunction.
•  Batteries supplied with equipment are covered by a warranty of three months.
•  When using low-grade or inappropriate fuel.

konner-sohnen.com

|

    13