Könner & Söhnen KS 600RTG, Manual

  COMMISSIONING

COMMISSIONING

During the commissioning:
1. Fill the crankcase with engine oil SAE 10W-30 or SAE 10W-40.

2.  Fill  the  transmission  case  (except  model  KS  7HP-850A)  with 

SAE 75W-90, SAE 80W-90 or SAE 85W-90 grade oil to the level 

specified for a given model. Be sure to check the oil level with 

an oil dipstick, as the device may contain residual oil after a 

production check. Do not exceed the recommended amount of 

oil!

  SUPPORT LEG

SUPPORT LEG

Attach the tiller’s support leg to the bracket by inserting the fasteners into the corresponding holes 

(see 

pictures 35-37 in the Appendix).
KS 7HP-950A

KS 7HP-950A

 –  see picture 35 in the Appendix.

KS 7HP-950S

KS 7HP-950S

 –  see picture 36 in the Appendix.

KS 7HP-1050G, KS 9HP-1350G-3

KS 7HP-1050G, KS 9HP-1350G-3

 –  

see picture 37 in the Appendix.

OPERATION INSTRUCTION

6

The tiller is supplied without oil and fuel.

Before first start-up, be sure to fill in the oil and refuel 

the device! Use a funnel to refuel.

IMPORTANT!

fuel tank

oil filler cap / oil dipstick

filter cap

filter element

fill 50-100 ml of oil

3. Fill the fuel tank with gasoline.
4.  Unscrew the air filter cover and fill 50-100 ml of engine oil into the air filter separator. Package contents 

may vary. For an engine with a paper filter, there is no need to fill the separator with engine oil.

 USEFUL TIPS

USEFUL TIPS

1.  To determine the tilling depth, use the coulter at different heights. With the coulter driven deeper into 

the soil, the cutters also go deep into the soil and the movement of the device forward slows down 

considerably.

2.  The tiller speed is determined by adjusting the engine speed. The cutters go deep into the soil with the 

device in the fixed position.

3.  To speed up the tiller movement, adjust the coulter higher to lift the cutters.
4.  Immediately release the clutch lever when the tiller is blocked by foreign objects. Stop the engine, 

remove obstacles and check the tiller for deformation and damage.

    Replace damaged parts as necessary.

konner-sohnen.com

|

    7