2) Double press
ESC
to return to previous menu
。
C. LED Test
The
LED Test
Function verifies if the I/M Readiness LED indicator
lamps are functioning properly
。
1
)
When completed
,
Press any key to exit
。
3.8 Vehicle Coverage
The scan tool is specially designed to work with all OBD II compliant
vehicles
,
including control area network (CAN)
,
it is required by EPA
that all 1996 and newer vehicles (Cars and light trucks) sold in the
united states must be OBD II compliant and this includes all american
,
asian and European vehicles
。
A small number of 1994 and 1995 model year gasoline vehicles are OBD
II compliant
。
To verify if a 1994 or 1995 vehicle is OBD II compliant
,
check the vehicle emissions control information(VECI) Label
,
which is
located under the hood or by the radiator of most vehicles
。
If the vehicle
is OBD II compliant
,
the label will designate “OBD II Certified”
。
Additionally
,
Government regulations mandate that all OBD II
compliant vehicles must have a “common” sixteen-pin Data Link
Connector (DLC)
。
For the vehicle to be OBD II compliant is must have a 16-pin DLC (Data
Link Connector) under the dash and the vehicle emission control
information label must state that the vehicle is OBD II compliant
。
4. OPERATION
1) Turn the ignition off.
2) Locate the vehicle’s 16-pin Data Link Connector(DLC).
3) Plug the OBD II cable into the vehicle’s DLC.
4) Turn the ignition on
,
Engine can be off or running.
5) after finishing
,
press
ESC
button enter Main Menu as following
Figure 4.1
15
Diagnose
DTC Lookup
Review
Tool Setup
Print Data
Help
Summary of Contents for KW830
Page 1: ...User s ManualOBD2 EOBD SCANNER CAN OBDII EOBD KW830...
Page 2: ......
Page 39: ......
Page 40: ......