page 3
KP Strong Safe, grade II
Application
KP Strong Safes provide a high degree of protection for storing valuables. They are designed to protect cash,
checks, promissory notes, stocks and shares, documents and other important and valuable items. KP Strong
Safes are usually used in banks, financial institutions and cashier rooms.
Certificates for storing
Valuables in accordance with the EN 1143-1 standard, grade II;
Warning!
In order to keep the product’s resistance grade safe or cabinet weighing up to 1 000 kg must be
anchored to the ground according to the user manual.
Important – read before operating the safe
Please read this user manual and follow its provisions.
If the device is equipped with a combination or/and electronic lock ALWAYS remember to change a
default code on its own, unknown to third parties, BEFORE using the device. Leaving default code is a
threat to the security of deposited values.
Changing the code and test of the new code in the combination or electronic lock MUST be done on the
open door of the safe. By changing the code on closed door you run the risk of the need for their
emergency opening.
If the safe is equipped with a handle or knob to move the bolts, opening or closing the door should be
done ONLY by holding the handle or knob to move the bolts. Opening or closing the safe door by pulling
on the key, combination lock knob or electronic lock keypad can result in product damages, which are
not subject to warranty.
Before closing the safe door you MUST check if the bolts are maximally retracted. Extended bolts while
closing the safe door can damage the paint coat at the place of bolts impact on the edge of the door
opening. Such damage is not considered as a basis for warranty repair.
