page 8
KP Strong Safe, grade II
4.
When the box is at the desired height, placed on the clips, drill holes in the wall of the interior body
through the perforations in the rear wall of the box.
5.
Rivet the box to the rear wall of the interior body through the prepared assembly openings.
6.
Close the Strong Safe.
Installation of shelves
Safes are delivered with shelves packed separately and placed on the safe’s bottom. After unwrapping the
shelves, the shelf clips (in a bag) are located in the corresponding perforations in the battens (fig.2). Place the
shelves on the clips. The location of the shelves depends on the needs of the user and can be adjusted.
Fig. 2. Installation of shelf clips
Operation - opening
Opening of a safe fitted with a key lock only:
1.
Insert the key into the lock hole.
2.
Turn the key by over 90° (over 1/4 of a turn) clockwise, resistance indicates that the lock is open,
the key must remain in the lock (the key lock design prevents the key from being removed when
the lock is in open position).
3.
Turn the handle clockwise.
4.
Pulling the door opens the safe.
Opening of safes fitted with combination or electronic lock:
1.
Open the combination/ electronic lock following the steps described in the enclosed lock’s
operation manual.
2.
Turn the handle clockwise.
3.
Pulling the door opens the safe.
Opening of safes fitted with key and combination lock or electronic lock:
1.
Insert the key into the lock hole.
2.
Turn the key by over 90° (over 1/4 of a turn) clockwise, resistance indicates that the lock is open,
the key must remain in the lock (the key lock design prevents the key from being removed when
the lock is in open position).
3.
Open the combination/ electronic lock following the steps described in the enclosed lock’s
operation manual.
4.
Turn the handle clockwise.
5.
Pulling the door opens the safe.
Opening of safes fitted with two key locks:
1.
Insert the key into the first lock hole.
2.
Turn the key by over 90° (over 1/4 of a turn) clockwise, resistance indicates that the lock is open,
the key must remain in the lock (the key lock design prevents the key from being removed when
the lock is in open position).
3.
Open the second lock proceeding as above.
4.
Turn the handle clockwise.
5.
Pulling the door opens the safe.
