20
www.kontron.com
User Guide
COMe Ref. Carrier-i T10 TNI
2.3 System Inter faces
2.3.1 PCI Express Interfaces
The COMe Ref. Carrier-i T10 TNI provides three general-purpose PCI Express (PCIe) lanes:
»
PCIe#0 for the Mini PCIe half-size card slot, J28, connected to the microSD/SIM combo sock-
et, J20
»
PCIe#1 for Mini PCIe full-size card slot, J26, muxed with SATA#1 (mSATA), connected to the
microSD/SIM combo socket, J20. Mini PCIe may be enabled via the onboard DIP switch SW1.
»
PCIe#2 for onboard Gigabit Ethernet Controller, U23
Note:
The MiniPCIe half-size card slot, J28, is available as a standard feature on the COMe Ref.
COMe Ref. Carrier-i T10 TNIV (Value) and the COMe Ref. Carrier-i T10 TNIP (Professional)
versions.
2.3.2 SATA Interfaces
The COMe Ref. Carrier-i T10 TNI supports up to two SATA 3 Gb/s interfaces:
»
SATA#0 via the 22-pin SATA plug connector, J1
»
SATA#1 for the mSATA socket / Mini PCIe full-size card slot, J26, muxed with PCIe#1 (Mini
PCIe). mSATA may be enabled via the onboard DIP switch, SW1.
2.3.3 Gigabit Ethernet Interfaces
The COMe Ref. Carrier-i T10 TNI provides up to two Gigabit Ethernet interfaces via two single RJ45 con-
nectors:
»
GBE#0 on RJ45 Ethernet connector, J4, directly via the COMe mini Type 10 module
»
GBE#1 on RJ45 Ethernet connector, J7, via the onboard Intel® Ethernet Controller I210-IT,
U23 (on PCIe#2)
The Ethernet connector LEDs have the following states:
LINK (green):
Ethernet Link
ACT (green):
1000BASE-T Ethernet Speed
ACT (yellow):
100BASE-TX Ethernet Speed
ACT (off) + LINK(on): 10BASE-T Ethernet Speed
Note:
The RJ45 Ethernet connector, J7, and the Intel® Ethernet Controller I210-IT, U23, are
available as a standard feature on the COMe Ref. Carrier-i T10 TNIV (Value) and the COMe
Ref. Carrier-i T10 TNIP (Professional) versions.
