25
www.kontron.com
User Guide
COMe Ref. Carrier-i T10 TNI
2.3.13 DIP Switch
The COMe Ref. Carrier-i T10 TNI provides one 8-position DIP switch, SW1, for board configuration.
Figure 13: DIP Switch SW1
The default setting is indicated by using italic bold.
Table 15: DIP Switch SW1 Functionality
POSITION
SETTING
FUNCTIONALITY
1
ON
Enable GPIO support on GPIO pin header
OFF
Enable SDIO support for microSD/SIM combo socket
2
ON
Enable mSATA on full-size Mini PCIe / mSATA interface
OFF
Disable mSATA on full-size MiniPCIe / mSATA interface
3
ON
Enable USB host port on USB#7
OFF
Enable USB client port on USB#7
4
ON
Enable 5V standby power supply on COMe module for ATX function (S-States)
OFF
Disable 5V standby power supply on COMe module for ATX function (S-States)
5
ON
Enable 5V standby power to USB ports USB#[0;1] for wake events
OFF
Disable 5V standby power to USB ports USB#[0;1] for wake events
6
ON
Enable 5V standby power to USB ports USB#[2;3] for wake events
OFF
Disable 5V standby power to USB ports USB#[2;3] for wake events
7
ON
Enable booting from COMe module SPI Flash
OFF
Disable booting from COMe module SPI Flash-Carrier BIOS enabled
8
ON
Wireless disable for Mini PCIe
OFF
Wireless enable for Mini PCIe
1
3
2
4 5
7
6
8
ON
