COMe Ref. Carrier-i T6 TMI - User Guide Rev. 1.4
// 27
The following table provides pinout information for the S/PDIF header, J23.
Table 10: S/PDIF header J23.Pinout
S/PDIF Header (J23)
Pin
Signal
1
SPDIF_OUT
2
GND
3
SPDIF_IN
4
GND
2.3.8.
UART Interfaces
The COMe Ref. Carrier-i T6 TMIP provides two RS232 COM ports (RX/TX only) via the pin headers J30
(COM1/SER0) and J29 (COM2/SER1).
The following table provides pinout information for the pin headers J30 (COM1/SER0) and J29 (COM2/SER1).
Table 11: Pin Headers J30 (COM1/SER0) and J29 (COM2/SER1) Pinouts
COM/SER Pin Headers (J30) & ( J29)
Pin
Signal (J30)
Signal (J29)
3
GND
GND
2
SER0_RX
SER1_RX
1
SER0_TX
SER1_TX
2.3.9.
GPIO Interfaces
The COMe Ref. Carrier-i T6 TMIP provides four GPIs and four GPOs via a 10-pin GPIO pin header, J32.
The following table provides pinout information for the GPIO pin header J32.
Table 12: GPIO Pin Header J32 Pinout
GPIO Pin Header (J32)
Pin
Signal
10
GND
9
GPO3
8
GPO2
7
GPO1
6
GPO0
5
GPI3
4
GPI2
3
GPI1
2
GPI0
1
VCC 3.3V
