CP6000
Functional Description
ID 27942, Rev. 05
© 2005 Kontron Modular Computers GmbH
Page 2 - 5
2794
2.05.UG.VC.051020/17275
8
P R E L I M I N A R Y
The following tables provide information on the Intel® Celeron® M processor supported on the
CP6000 and its maximum power dissipation.
2.1.2
Memory
The CP6000 has two SODIMM sockets for installing memory and supports a maximum of 2
GB. All installed memory will be automatically detected, so there is no need to set any jumpers.
The CP6000 supports all DDR200, DDR266 and DDR333 SDRAMs on 200-pin SODIMMs with
or without ECC offered by Kontron Modular Computers. All memory components and
SODIMMs used with this board must comply with the following PC DDR SDRAM memory spec-
ifications:
• PC DDR SDRAM Memory Specification DDR200, DDR266 and DDR333
• PC Serial Presence Detect Specification
Only qualified DDR SDRAMs from Kontron Modular Computers can be used with the CP6000.
Table 2-4: Supported Intel® Celeron® M Processor on the CP6000
SPEED
1.3 GHz
PACKAGE
µFCBGA
L2 CACHE
512 kB
CORE VOLTAGE
1.356 V
PROCESSOR
SIDE BUS
400 MHz
Table 2-5: Maximum Power Dissipation of Intel® Celeron® M (CPU only)
FREQUENCY MODE
1.3 GHz
Maximum Power
24.5 W
Table 2-6: Memory Options Utilizing SODIMM Sockets
SODIMM-0
SODIMM-1
TOTAL
512 MB
--
512 MB
--
512 MB
512 MB
512 MB
512 MB
1 GB
1 GB
--
1 GB
--
1 GB
1 GB
1 GB
1 GB
2 GB
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
