CP-RIO6-001/-DD-216/-HD/-HD-216
Installation
ID 1043-5620, Rev. 2.0
Page 3 - 3
3.
Installation
The CP-RIO6-001/-DD-216/-HD/-HD-216 has been designed for easy installation. However,
the following standard precautions, installation procedures, and general information must be
observed to ensure proper installation and to preclude damage to the CP-RIO6-001/-DD-216/
-HD/-HD-216, other system components, or injury to personnel.
3.1
Safety Requirements
The following safety precautions must be observed when installing or operating the CP-RIO6-
001/-DD-216/-HD/-HD-216. Kontron assumes no responsibility for any damage resulting from
failure to comply with these requirements.
Caution!
Ensure that the system main power is removed prior to installing or removing
the CP-RIO6-001/-DD-216/-HD/-HD-216. Ensure that there are no other
external voltages or signals being applied to the CP-RIO6-001/-DD-216/-HD/-
HD-216 or other boards within the system. Failure to do so could endanger
your life or health and may damage the CP-RIO6-001/-DD-216/-HD/-HD-216
or other system components including process-side signal conditioning
equipment.
ESD Equipment!
The CP-RIO6-001/-DD-216/-HD/-HD-216 contains electrostatically sensitive
devices. Please observe the necessary precautions to avoid damage to the
CP-RIO6-001/-DD-216/-HD/-HD-216:
• Discharge your clothing before touching the assembly. Tools must be dis-
charged before use.
• Do not touch components, connector-pins or traces.
• If working at an anti-static workbench with professional discharging
equipment, please do not omit to use it.
