CP3002-RC/CP3002-RA
Configuration
ID 1039-3625, Rev. 1.0
Page 4 - 17
P R E L I M I N A R Y
4.3.15
Debug LED Control Register (DLCTRL)
This register is used to switch on and off the Debug LEDs.
Table 4-20: Debug LED Control Register (LCTRL)
REGISTER NAME
DEBUG LED CONTROL REGISTER (DLCTRL)
ADDRESS
0x291
BIT
NAME
DESCRIPTION
RESET
VALUE
ACCESS
7-4
DLCMD
Debug LED command:
0000 = Get DLED 0
0001 = Get DLED 1
0010 = Get DLED 2
0011 = Get DLED 3
0100 - 0111 = Reserved
1000 = Set DLED 0
1001 = Set DLED 1
1010 = Set DLED 2
1011 = Set DLED 3
1100 - 1111 = Reserved
0000
R/W
3-0
DLCOL
Debug LED color:
0000 = Off
0001 = Green
0010 = Red
0011 = Red+green
0100 - 1111 = Reserved
0000
R/W
Note ...
This register can only be used if the Debug LEDs indicated in the “Debug LED
Configuration Register” (Table 4-18) are configured in Mode A.
