www.kontron.com
CP6924-1-RA-A User Guide
23
10. Save configuration by using the ‘
write mem
’ command and confirm ’
y
’
(Ethernet Fabric) #
write mem
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to save? (y/n)
y
Config file 'current/startup-config' created successfully.
Configuration Saved!
(Ethernet Fabric) #
To access the CLI via Gigabit Ethernet networkport, open a telnet connection to the configured IP address, port 23.
It might make sense to separate the management network from the data path by setting appropriate VLANs
For additional information on the system configuration, refer to the CP6924 CLI Reference Manual.
