KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 32
4.3.
Sides (Left and Right)
On the left side and right side of the KISS 4U V3 SKX platform, are six M4 threaded screw holes (Figure 20 and Figure
21, pos. 2) used to install 19" industrial rack slide rails.
If implemented as a tower variant the left side of the KISS 4U V3 SKX becomes the bottom side of the tower, see
Chapter 4.6: Bottom Side View (Tower Variant).
Figure 20: Left Side View
Figure 21: Right Side View
1
19” Handle bracket
2
6x M4 tapped holes for slide rails assembly
(on both sides)
3
Cover
4
Internal bolt for long card hold down bracket
5
Externally accessible fastening screw
(countersunk, M3x6) for long card hold down
bracket
6
Internal bolt for short card hold down bracket
7
Externally accessible fastening screw
(countersunk, M3x6) for short card hold down
bracket
8
Kontron type label
3
1
2
3
8
4
5
6
7
1
