RMVS-1U RMVS KVM Switch User’s Guide
5. Firmware Upgrade Port
The
Firmware Upgrade Cable
that transfers the firmware upgrade
data from the administrator’s computer to the RMVS KVM units
(See p. 5-2), plugs into this RJ-11 socket.
6. Firmware Upgrade Recovery Switch
During normal operation and while performing a fimware
upgrade, this switch should be in the NORMAL position. See p.
5-8 for details about the use of this switch.
7. Console Port Section
The Integrated Console units RMVS-1U.XXXB/C have the loop out cables
that come out the right of the unit and plug into the keyboard monitor,
and mouse ports of their integrated KVM Unit. These cable are only
6 inches in length. The Integrated Console units are always Station 01.
In a daisy chained installation these console ports are not used on the
supporting stations 02 through 32.
8. Pass through Opening
The Integrated Console Units RMVS-1U.XXXB/C have the loop out
cables come through here.
3. Cable Tie Slot
If you want to use a cable tie to gather the cables together, you can
run it through this slot to attach it to the unit. ( not provided on the
4. Power Jack
The power adapter cable plugs in here.
Integrated Console Units)
1-11
