SmartClient-BSW - User Guide, Rev. 1.1
// 46
Figure 15: BIOS Advanced Menu - Display Configuration
BIOS SETUP UTILITY
Main
Advanced
Power
Security
Boot
Save & Exit
Display Configuration
Primary Display
[IGD]
UWA Frame Buffer Size
[256MB]
→
←
: Select Screen
DVMT Pre-Allocated
[64MB]
↑
↓
: Select Item
DVMT Total Gfx Mem
[256MB]
Enter: Select
+/-: Change Opt.
Primary IGFX Boot Display
[VBIOS Default]
F1: General Help
VGA / LVDS Switch
[LVDS]
F2: Previous Values
LVDS Panel Type
[1920x1080 2CH]
F3: Optimized Defaults
LVDS Backlight Control - PWM
190
F4: Save & Exit
LVDS Backlight Control - Voltage
[2.5 V]
ESC: Exit
Version 2.17.1249. Copyright (C) 2016, American Megatrends, Inc.
Feature
Option
Description
Primary Display
[IGD], [PCIe], [Auto]
Select which graphic controller to be used as the primary
display device.
UWA Frame Buffer
Size
[128MB], [256MB],
[512MB]
Select the Aperture Size.
DVMT Pre-Allocated
[32M], [64M], [96M],
[128M], [160M],
[192M], [224M],
[256M], [288M],
[320M], [352M],
[384M], [416M],
[448M], [480M],
[512M]
Select DVMT Pre-Allocated (Fixed) Graphics Memory size used
by the Internal Graphics Device.
DVMT Total Gfx Mem
[128M], [256M], [MAX] Select DVMT Total Graphic Memory size used by the Internal
Graphics Device.
Primary IGFX Boot
Display
[VBIOS Default], [DP],
[HDMI], [VGA/LVDS]
Select the Video Device which will be activated during POST. This
has no effect if external graphics present.
Secondary boot display selection will appear based on your
selection.
DOS modes will be supported only on primary display.
VGA / LVDS Switch
[VGA], [LVDS]
Select switch to VGA mode or LVDS mode.
LVDS Panel Type
[640x480 18Bit 1CH],
[800x480 18Bit 1CH],
[800x600 18Bit 1CH],
[1024x768 18Bit 1CH],
[1440x900 18Bit 2CH],
[1600x900 18Bit 2CH],
[1024x600 18Bit 1CH],
[1366x768 18Bit 1CH],
[1024x768 24Bit 1CH],
[1280x1024 24Bit
2CH], [1366x768 24Bit
Select the appropriate setup item for LVDS panel.
