SmartClient-KLU - User Guide, Rev. 1.2
// 56
11.2.3.
Power Setup Menu
The Power setup menu provides functions and a sub-screen for power configurations. The following sub-screen
function is included in the menu:
WatchDog Timer Configuration
Figure 27: BIOS Power Setup Menu
BIOS SETUP UTILITY
Main
Advanced
Power
Boot
Security
Save & Exit
Power Configuration
ACPI Sleep State
[S3 (Suspend to RAM)]
Restore AC Power Loss
[Power Off]
Power Saving Mode
[Disabled]
→
←
: Select Screen
↑
↓
: Select Item
Resume Event Control
Enter: Select
Resume By LAN Device
[Disabled]
+/-: Change Opt.
Resume By PCI-E Device
[Disabled]
F1: General Help
Resume By Ring Device
[Disabled]
F2: Previous Values
Resume By RTC Alarm
[Disabled]
F3: Optimized Defaults
F4: Save & Exit
> WatchDog Timer Configuration
ESC: Exit
Version 2.18.1263. Copyright (C) 2017, American Megatrends, Inc.
Feature
Option
Description
ACPI Sleep State
[S3 (Suspend to
RAM)]
Select whether to enable or disable suspend function and
determine an appropriate suspend mode.
Restore AC Power
Loss
[Power Off], [Power
On], [Last State]
Control whether the system will stay on after AC power is
removed and then restored.
Select [Power Off] if you want the system to remain off after
power restored.
Select [Power On] if you use a power strip to turn the system on.
Power Saving Mode
[Disabled], [EUP
Enabled], [DeepSx
Enabled]
Select whether to enable Power Saving Mode.
Resume By LAN
Device
[Disabled], [Enabled]
Select whether to enable or disable Wake from LAN Device.
Resume By PCI-E
Device
[Disabled], [Enabled]
Select whether to enable or disable Wake from PCIE Device.
Resume By Ring
Device
[Disabled], [Enabled]
Select whether to enable or disable Wake from Ring Device.
Resume By RTC Alarm [Disabled], [Enabled]
Select whether to enable or disable Wake Up on Alarm, to turn
on your system on a special day of the month.
Figure 28: BIOS Power Setup Menu - WatchDog Timer Configuration
