lan set 1 vlan id 10
lan set 1 ipaddr 192.168.101.18
lan set 1 netmask 255.255.255.0
lan set 1 defgw ipaddr 192.168.101.254
mc reset cold
set targetaddr 0x92
lan set 1 ipsrc static
lan set 1 vlan id 10
lan set 1 ipaddr 192.168.101.19
lan set 1 netmask 255.255.255.0
lan set 1 defgw ipaddr 192.168.101.254
mc reset cold
set targetaddr 0x20
Assign VLAN 10 on the BMC.
Define static IP address.
Define netmask.
Define default gateway IP address.
Reboot the BMC
Target BMC of MSP node 9.
Configure IP source to static.
Assign VLAN 10 on the BMC.
Define static IP address.
Define netmask.
Define default gateway IP address.
Reboot the BMC
Target active ShMC IPMI address.
set targetaddr 0x82
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x84
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x86
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x88
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x8a
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x8c
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x8e
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x90
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x92
lan set 1 vlan id 10
lan set 1 ipsrc dhcp
mc reset cold
set targetaddr 0x20
Target BMC of MSP node 1.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 2.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 3.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 4.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 5.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 6.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 7.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 8.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target BMC of MSP node 9.
Assign VLAN 10 on the BMC.
Configure IP source to DHCP.
Reboot the BMC
Target active ShMC IPMI address.