Shenzhen Konvision Technology Co,.Ltd
www.konvision.com
39
To do factory reset, please follow the below six steps:
1. Press MENU button to enter main menu.
2. Turn VOLUME knob to item Setup and select it.
3
.
Press ENTER to select the menu settings sub-menu option.
4
.
Press the DOWN button to select the factory setting option.
5
.
Press the ENTER key to select whether to restore the factory settings. Select "Yes" when
prompted.
6
.
Wait for 3 seconds and then press the POWER button to boot, the monitor to restore
the factory settings is completed.
Remote Control
Remote control the monitor through Ethernet:
1
.
Connected with monitor via LAN, and you can achieve remote controlling by
software“Konvision Device Controller”.(Network remote control software and instructions
please contact with the dealer)
2
.
The network cable is a parallel cable connection