15
15
Menu item
Description & Setting
Vector
[OFF]
Close vector.
[100]
Vector illustration 100% display.
[75]
Vector reduced to 75% display.
· OFF
· 100
· 75
Histogram
[OFF]Close histogram.
[LUMA]Display brightness histogram.
[RGB]Display RGB histogram.
· OFF
· LUMA
· RGB
Channel Select
[Channel 1]
Select to display
channel 1 waveform separately.
[Channel 2]
Select to display channel
2 waveform separately.
[Channel
3]
Select to display channel 3
waveform separately.
[Channel 4]
Select to display channel 4 waveform
separately.
· Channel 1
· Channel 2
· Channel 3
· Channel 4
Remarks: this function is used in the
Quad-view mode. In other modes, this
function is grayed out and can’t be
set.
Menu item
Description & Setting
False Color
[ON]
Turn on False Color.
[OFF]
Turn off False Color.
· ON
· OFF
Menu item
Turn on Time Code
Time Code Display as VITC1
Time Code Display as VITC2
T i m e C o d e D i s p l a y a s
LTCDescription & Setting
Focus Assist
[OFF]
Turn off Focus Assist.
[Red]
Turn
on Focus Assist as Red.
[Green]
Turn
on Focus Assist as Green.
[Blue]
Turn
on Focus Assist as Blue.
· OFF
· Red
· Green
· Blue
Focus Gain
Focus Gain 0-100.
· 0-100
Zebra
[ON]
Turn on Zebra.
[OFF]
Turn off Zebra.
· ON
· OFF
Zebra Level
The zebra line scale can be set to
any percentage within the range of
0%-100%. When the brightness in
the picture reaches or exceeds this
percentage, an alarm will occur and
the alarm part will be overlaid with a
red zebra crossing.
· 0-100
H Flip
[ON]
Turn on H Flip.
[OFF]
Turn off H Flip.
· ON
· OFF
Time Code
[OFF]
Turn on Time Code.
[VITC1]
Time Code Display as VITC1.
[VITC2]
Time Code Display as VITC2.
[LTC]
Time Code Display as LTC.
· OFF
· VITC 1
· VITC 2
· LTC
Remark: HDMI signal without Time
Code Display
Aux settings: