QUICK
INSTALLATION
1.
Connect the USB charger to the camera (micro
USB socket at the back) and plug it
2.
Wait for the camera to beep twice on 3 tones
and make 2 rotations - your camera is ready to
be paired
3. If during the first installation the camera does
not emit sound, press the reset button for 10s
then release. A three-note jingle should sound
4.
Download the Konyks APP by following the QR
Code on page 2
5.
Use an Android or iOS smartphone and connect
to a 2.4 Ghz Wi-Fi network
6.
Open the Konyks APP (register if needed)
7.
Click on
+
at the top right then choose
8.
The APP prompts you to enter your Wi-Fi
password (be careful with upper and lower
case) then click on "Next"
9.
A QR code will appear on your smartphone;
place it in front of the camera lens until you
hear a three-note jingle
10.
Your camera is installed and functional. If not,
RESET the camera then start over
8
Summary of Contents for Camini+
Page 1: ...Camini Quick Start ...
