KZ-NP6000 PLUS User Manual
19
G.
Preset: To set up the presets from 1 to 8 presets, also including Big Close-Up, Close-
Up, Vista, Medium Shot, Close Shot and so on. The default presets are;
11
Big Close-Up
14
Medium Shot
12
Close-Up
15
Vista
13
Close Shot
H.
PTZ Operation:
a.
Click
，
，
，
to control Up, Down, Left, and Right direction of
the camera.
b.
Zoom: “+” and “-“ indicate to Zoom in or Zoom out of the lens.
c.
Focus: “+” and “-“ indicate to focus on distanced and near object.
d.
Iris: “+” and “-“ indicate to transfer Large and Small aperture
Note:
The control line from the camera to KZ-NP6000 Plus or the tracking host to the
recording host must be correspondent and cannot be misconnected. The PTZ protocol,
baud rate, and address code in the channel need to be set to correspond to the settings
of the camera to perform the PTZ operations. It must be in the manual mode to
perform PTZ control on the PTZ setup menu or the recording main interface. To
operate the PTZ in the main interface, you must first activate the corresponding
channel on the resource channel, and then click the PTZ control button to use it
Summary of Contents for KZ-NP6000 PLUS
