2. Locating the threaded holes in the upper front leg, line up the holes in the
footrest with the holes in the upper front leg.
3.
© Weybury Hildreth Ltd. 2018
4
Connecting the upper front the legs, and the fitting the footrest
Screw Holes
1.
Locate the two upper front legs. Ensure they are the legs that have the threaded holes.
As in Fig.1 below, screw the upper front leg into the base of the highchair clockwise.
Ensure that the threaded holes are facing the front. If the holes are not facing front,
tighten further until this is achieved. Repeat for opposite side.
Insert supplied fixing screws provided and tighten with a Phillips head screwdriver (not
supplied). Do not over-tighten the screws. Repeat for opposite side.
Fig.1
