5
© Weybury Hildreth Ltd. 2018
Connecting the upper rear legs & lower legs
Locate the four lower legs. Screw
the lower leg into the upper leg as
shown in Fig. 4, below. Do not
over-tighten. Repeat for remaining
three legs.
5.
6. When your highchair is assembled,
adjustable feet so that all four feet
lay flat on the floor surface. see
Fig.5.
4.
Locate the two upper rear legs. Line up the screw and the hole and turn clockwise until
the leg is secure as in Fig. 2. Do not over-tighten. Repeat for opposite side.
The highchair should be the same as the image in Fig.3
Fig.2
Fig.3
Fig.4
Fig.5
