SMLD smoke evacuation damper
Mounting instructions
USER INSTRUCTIONS
It is recommended that dampers be installed in the frame previously sealed in the duct.
During installation, the perpendicularity of the assembly must be maintained. The SMLD dampers
must be installed vertically. During installation, the damper must be protected from the protrusion of
sealing products and handled with care.
During commissioning of the installation, clean all dust and grime on the assembly to prevent risks of
slat deterioration.
The electromagnetic coil is an extremely sensitive element of the mechanism. At commissioning,
clean the damper (dust and other particles), in particular the coil.
The front part must have a protection grille to preserve the firewall class. Note: Any air direction (air
removal and supply).
• Manual operation
• Motor-driven version
Pull to activate the mechanism
• Remote-controlled version
11
