background image

1

User Manual

A newer version of this User Manual may exist. Please be sure to check our support page 
for the latest version of this guide: www.koolance.com

GENERAL PRECAUTION

Please read this manual carefully before beginning the installation of your Koolance 
system.

PROHIBITED USE

This product is designed, developed and manufactured as contemplated for general use, 
including without limitation: general office use, personal use and household use, but is not 
designed, developed and manufactured as contemplated for use accompanying fatal risks or 
dangers that, unless extremely high safety is secured, could lead directly to death, personal 
injury, severe physical damage or other loss, including without limitation: nuclear power core 
control, airplane control, air traffic control, mass transport operation control, life support, 
or weapon launching control. If these products are used in such hazardous environments, 
Koolance Incorporated does not warrant them.

TRADEMARKS

The Koolance name and logo are trademarks or registered trademarks of Koolance, Inc. 
Other company and product names used in this publication are for identification purposes 
only and may be trademarks or registered trademarks of their respective companies.

COPYRIGHT

All rights reserved. Copyright (C) Koolance Incorporated.

!

WARNING

:

  

Indicates a potentially hazardous situation which, if not avoided, 

could result in personal injury or be life-threatening.

!

CAUTION

:

  

Indicates a potentially hazardous situation which, if not avoided, 

may result in damage to equipment or property.

PROHIBITED

:

  

Indicates a prohibited action.

ABOUT SIGNS

Throughout this document, critical information is highlighted in gray-colored boxes. The  
following symbols are intended to help prevent any situation which may cause personal 
injury and/or damage to equipment:

Summary of Contents for EXC-450










Reviews: