background image

14

Limited Warranty

Disclaimer

Koolance Incorporated (“Koolance”) warrants each new Koolance liquid-cooled 
system (“the system”), against defects in materials or workmanship for a period of 
one year from the date of purchase, and agrees to repair or replace any defective 
Koolance system without charge. Shipping costs are non-refundable.

This warranty is non-transferable. All warranty claims must be accompanied by the original 
proof of purchase.

THIS WARRANTY DOES NOT COVER DAMAGE RESULTING FROM ACCIDENT, 
MISUSE OR ABUSE, LACK OF REASONABLE CARE, SHIPPING DAMAGE, 
MODIFICATIONS, THE AFFIXING OF ANY ATTACHMENT NOT PROVIDED WITH 
THE PRODUCT, LOSS OF PARTS, OR OPERATING COMPONENTS AT SPEEDS OR 
FUNCTIONS OTHER THAN THOSE SPECIFIED BY THEIR MANUFACTURERS.

Use of unauthorized replacement parts or liquids will void this warranty. Koolance 
Incorporated will not pay for warranty service performed by a non-authorized repair 
or diagnostic service and will not reimburse the consumer for damage resulting from 
warranty service performed by a non-authorized repair service. No responsibility is 
assumed for any special incidental or consequential damages due to a defective Koolance 
product.

In order to obtain warranty service, contact our RMA department for information. The 
product must be shipped postage prepaid to an authorized Koolance service location. It 
is suggested that, for your protection, you return shipments of product by insured mail, 
insurance prepaid. Damage occurring during shipment is not covered by this warranty. 
Shipping costs are non-refundable. No other warranty, written or oral, is authorized by 
Koolance Incorporated.

IN NO EVENT SHALL KOOLANCE INCORPORATED OR ITS EMPLOYEES, AGENTS, 
SUPPLIERS, MANUFACTURERS, OR CONTRACTORS BE LIABLE FOR ANY 
DAMAGES OF ANY KIND OR CHARACTER, INCLUDING WITHOUT LIMITATION 
ANY COMPENSATORY, INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR 
CONSEQUENTIAL DAMAGES, LOSS OF USE, LOSS OF DATA, LOSS OF INCOME OR 
PROFIT, LOSS OF OR DAMAGE TO PERSONS OR PROPERTY, CLAIMS OF THIRD 
PARTIES, OR OTHER LOSSES OF ANY KIND OR CHARACTER, AND WHETHER 
OR NOT THE POSSIBILITY OF SUCH LOSS OR DAMAGE HAS BEEN NOTIFIED TO 
KOOLANCE INCORPORATED.

Summary of Contents for EXC-450










Reviews: