9
User Manual
External Nozzles & Power Cable
Cut the included 10mm (3/8”) tubing into two segments. You will
need to connect each to the Exos’ rear nozzles.
Each tubing connection uses a threaded
compression fi tting (“hose screw”) to keep it
secure. To connect these components, fi rst
thread a hose screw onto the tube end.
Once the hoses are connected, plug the
external power cable into the Exos.
Squeeze the tube while pushing it fi rmly
over the nozzle. Tubing should completely
cover the nozzle.
Tighten the connection by sliding the
compression fi tting down over the nozzle
and screwing securely.
