8
Once the power supply is mounted inside
the chassis, insert and tighten the desired
inlet and outlet nozzles (purchased
separately).
These should only be installed on the top
nozzle sockets!
Tubing Connection
Attach the inlet and outlet tubing to the inlet
and outlet nozzles.
If you require the PSU-1300ATX-12N
hoses to be connected inside the computer
chassis, install the supplied L-bracket into
an available rear card slot.
Feed the inlet and outlet hoses from the
power supply heat exchanger back into the
L-bracket.
Finally, connect these coolant hoses to your
existing liquid cooling system.
To allow for sharper hose angles
without kinking, Koolance offers steel
“Tubing Wrap”, available at
www.koolance.com
