SETTING THE TIMER
Just set the Timer once and the preset
ON/OFF time will be repeated daily.
When the pre-set time arrives, the unit
will turn ON/OFF automatically. It can
be shown on the Green LED power indicator. Repeat the
following steps to set the Current Time > Timer “ON” Time
> Timer “OFF” Time respectively.
1. Press and hold MODE key to enter setting mode.
2. You need to set up the current time first. At the timer
setting mode, the hour digits will start flashing.
3. Press UP key to adjust the hour value and press MODE
to confirm.
4. After confirming the hour value, the minute digits will
start flashing. Press UP key to adjust the minute value
and press MODE to confirm.
5. After confirming the current time
setting, it will automatically switch
to Timer On setting.
6. Repeat step 3 and 4 to set the desired Timer “ON” set-
ting.
7. After confirming the Timer “ON”
setting, it will automat ically switch
to Timer “OFF” setting.
8. Repeat step 3 and4 to set the desired Timer “OFF” set-
ting.
NOTE:
In Timer ON/OFF setting, you will see a “ON/OFF” signal
shown at the top/bottom right corner of the LCD display.
9. When the timer ON/OFF time arrives,
the main unit will be turned ON/OFF
automatically and the Green Power
Indicator will light ON/OFF. A “clock”
sign will also be shown at the left of the LCD display
indicating whether the timer is “ON” or “OFF”.
10. Use the Reset Button to reset all the time setting val-
ues, including the current and timer ON/OFF Time.
NOTE:
• The hour setting is a 12-hour format (US version) or 24-
hour format (Europe version), the “AM” or “PM” icon
will be displayed at the Top/Bottom left corner of the LCD
for indication.
• Pressing and holding the UP Key will cause digits to
advance rapidly.
• Simply press the MODE Key to check ON/OFF time when
it is not in the Timer-Setting Mode.
• 7 •
• 8 •
