Model Hexa 001
________________________________________________________________________________________________________________________
__________________________________________________________________________________________________
www.koolmask.com
4 All rights reserved. Hexa 01-2020 EN
Step 2
Place the Filter Cover (with Filter inside) onto the Inner Mask. Make sure the locking pin (1) sticks out of the locking hole
(2) on both sides of the mask.
Step 3
Matching up the bottom two locking pins and holes first, then stretch the Face Seal back onto the mask. Make sure all 6
locking pins (1), two on each side and two on the bottom, match up with the locking holes (2).
