2
Please read this
user’s manual thoroughly before using.
Keep this manual handy for further reference
Transportation and Set Up
1. Do not transport the unit on an incline of more than 45 degrees.
2. Remove all packaging before using the freezer
3.
Install the Freezer in a well ventilated area, with a 4” clearance around the
cabinet walls for proper air circulation
4. Ensure the freezer is placed on a stable surface to avoid vibration and
noise.
5. Install the freezer in a dry area, do not use under direct sunlight, keep away
from any corrosive materials.
6. Before placing food inside the freezer, turn the temperature control to the
lowest point (highest number) for several hours until the freeze reaches 0
degrees Fahrenheit, once it reaches 0 degrees Fahrenheit you may place
food inside and adjust the controller to normal temperature.
Safety
1. Never store flammable, explosive or corrosive products in the freezer, and
keep the freezer away from such materials.
2. If power is cut off, wait at least 5 minutes before turning on again to avoid
damage to the compressor.
3. The temperature control may need to be adjusted based on the amount
of food in the freezer and the ambient room temperature. More food or a
higher room temperature may require a lower temperature setting (higher
number).
4. Never put hot food directly in to the freezer. Food should be cold or frozen
before placing it inside.
5. The cabinet is intended exclusively for the storage and/or display of
packaged food. For proper safety non-packaged foods should be packed
in plastic bags or containers.
6. Do no overload the freezer, leave room between products to allow for
proper air circulation.
7. Please make sure that your unit has its own dedicated outlet.
8. Do not use an extension cord.
