11
to the battery compartment
- Put the scale on a flat table, and ensure it is steady.
WEIGHTING STEP
1. Press the key of “On/t” to power on. “0” appears on the display after
2 seconds.
2. When you press the key of “UNIT”, you can change unit of measu-
rement to “g”, “oz”, ”kg”, ”lb”.
3. Put the container on the glass, the LCD screen will show the weight
of container.
ERROR DISPLAY INTRODUCTION
- When the scale is over loaded, the “EEEEE” will appear on the display.
- When the screen shows “ LO ”, it means that there is a power shor-
tage, please change the batteries as soon as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
- Use 2PCS AAAbatteries
- When you change the battery, please open the battery cover on the
back, put the battery in the battery case, then close the battery cover
tight.
ADVICE FOR USE AND CARE
- Always put the scale on a clean and flat table.
- The max. weight the scale can handle is 5000g.
- To ensure the life of the scale, do not put the scale under wet, hot &
cold conditions.
- The product is a high precision electronic weighing apparatus.
Therefore do not drop otherwise the scale can be easily damaged.
- If the scale surface is dirty, please clean the scale with soft cloth, do
not use any chemical detergent and don’t allow water to get inside the
scale.
- If the result appears improperly, please check about whether the bat-
teries and the touching point contact well.
Replace with new battery if used for a long time already,then try again.
