20
an authorized Service center.
7. Close supervision is necessary for this appliance being used by or
near children. Do not leave iron unattended while connected or on an
ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam.
Hot water may leak from the iron. Use caution when filling or turning
the steam iron upside down.
9. To protect against burns or injury to persons, do not direct steam
toward the body when ironing.
10. The iron must be used and rested on a stable surface. When pal-
cing the iron on its stand, ensure that the surface on which the stand
is placed is stable.
HOW TO FILL WITH WATER
Make sure the iron is turned off and cold, and that the power cord is
unplugged from the electrical outlet.
1. Set the ‘Variable’ steam knob to the ‘0’ position before filling the iron
with water.
2. Open the ‘Water Fill’ Opening and fill the Tank up to the ‘MAX’ Line
on the tank.
3. The water level can be observed through the transparent part of the
tank, when iron placed vertically, in case of water level becomes low,
refill the tank, following the procedure described in steps 1 to 3 above.
4. Pour out the remaining water after use.
Note
Do not use water additives or substitute water such as linen or
scented water in the steam iron, they can stain fabrics or damage the
iron. Do not fill the water more than the ‘MAX’ position.
HOW TO USE AS DRY IRON
1. Position the iron vertically.
2. Plug the iton.
3. Set the Temperature Control Dial to ‘MIN’ position.
4. Preheat the iron until the indicator light goes out.
Now dry ironing can begin.
Summary of Contents for 5902399
Page 1: ... ...
